Anhui KingPower Equipment and Mould Manufacture Co., Ltd -

Anhui KingPower Equipment and Mould Manufacture Co., Ltd

Showing 1 - 10 of 20, total 2 pages [First] [Previous] [Next] [Last]

auto instrument panel foaming line
Specification: Instrument
Detail: The line consists of foaming die carrier, injection robot, vacuum system, water heating system and attached pneumatic system, hydraulic system and electrical control system. Working procedures: workpiece carried to the caviti...

three station vacuum thermoforming m/c for auto interior part
Specification: 3 stations
Detail: The machine is applied to producing auto instrument panel or door vacuum forming parts. It mainly consists of loading station, heating station, forming station, etc. Working procedure: loading, heating, auto-pressing, blowing...

foaming fixture for refrigerator cabinet
Specification: Cabinet
Detail: This fixture can be used in cabinet foaming of refrigerator and freezer; it can be installed on the circular foaming line or autonomous working. It consists of outer fixture and inner mould. The outer fixture got various stru...

foaming mould for cooling appliance cabinet
Specification: Cabinet
Detail: This mould is suitable to the linear cabinet forming line and got advantages as following: varied configuration, high glabrous and nimble core-pulling mechanism. It can be applied widely to cabinet foaming of refrigerator and ...

vacuum thermoforming mould for refrigeration door
Specification: Refrigeration Door
Detail: This is door mould thermoforming is produce from the female forming principle. It consists mould core, base, core-pulling mechanism, overturn part, heating system, assistant male mould and others. This mould is made from ZL40...

vacuum thermoforming female mould for refrigerator cabinet inner
Specification: Female Mould
Detail: The working procedures of male mould forming are as following: Soften up the plate through heating, then stretch the plate through bubbling, the assistant male mould will move to the opposite direction to make the plate into t...

vacuum forming (thermoforming) male mould for refrigerator cabin
Specification: Male Mould
Detail: The working procedures of male mould forming are as following: Soften up the plate through heating, then stretch the plate through bubbling, and that will be a sealed cavity, vacuumize it and make it subpressure, then the plat...

washing machine outer shell forming line
Specification: outer shell
Detail: This line mainly consists of loading station, lifting table, conveying trolley, loading manipulator, press-punching station, carrying manipulator, press-flanging station, transporting belt, 180o overturning station, roller lin...

drum type washing machine inner drum punching & flanging forming
Specification: Punching & Flanging
Detail: The line consists of decoiler, leveling & feeding station, punching station, shearing station, unloading station, pneumatic unit, hydraulic unit, electric control unit, etc. Working procedure: uncoil automatically, leveling, ...


Showing 1 - 10 of 20, total 2 pages [First] [Previous] [Next] [Last]
1 2